Home » Posts tagged 'hp ilo'

Tag Archives: hp ilo

HP ILO Port numbers

If you are trying to access an iLO behind a firewall, there are some TCP ports that need to be opened on the firewall.

Here is a list of the default ports used by iLO.

These can be modified on iLO’s  by clicking on Administration -> Access -> Services tab.

ILO FUNCTION           SOCKET TYPE PORT NUMBER 
---------------------- ----------- -----------
Secure Shell (SSH)         TCP        22
Remote Console/Telnet      TCP        23
Web Server Non-SSL         TCP        80
Web Server SSL             TCP        443
Terminal Services          TCP        3389
Virtual Media              TCP        17988
Shared Remote Console      TCP        9300
Console Replay             TCP        17990
Raw Serial Data            TCP        3002

Thanks,

WintelAdmin

HP ILO Power and Reset CLI commands

You can also SSH into the ILO and examine the command-line options. After Connecting to ILO using Putty. “power help” will list the options available.

power on – Turn the server on
power off – Turn the server off
power reset – Reset the server

If the ILO is not connecting you may need to reset the ILO. In order to reset the ILO, you should have Lights-Out Online Configuration Utility installed on server. You can reset the ILO using the command listed below

hponcfg /reset or hponcfg /

If you have GUI installed,

1. Open
2. click on “Summary”
3. Select “Reset ILO/Set to factory default”
4. Click on “Reset” available under “Reset ILO firmware”.

On successful reset you will get a pop-up “Successful execution”.

Thanks,
WintelAdmin

How to reset HP ILO?

HP ILO sometime face hung-up issues and freezes on the interface. In this case we would need to reset the ILO controller to fix the issue. ILO can be easily reset using Putty Tool.

1. Establish a session to server ILO using Putty.
2. Move to Map1 using “CD Map1”.
3. Execute the command “reset”.

“CLI session stopped message” would be displayed on the screen and the reset would be completed in 30-50 secs.

Thanks,
WintelAdmin

How to connect to HP ILO using SSH?

It is very difficult sometimes to take the ILO Homepage of a remote computer. Site loads very slow or the page is not supported and sometimes the compatibility issue. However, its very good to connect ILO using SSH with the tool “Putty”. You can directly connect to the ILO using the putty and make use of some useful commands to complete the task with easy.

Some useful commands
power – Display the current server power state
power on – Turn the server on
power off – Turn the server off
power reset – Reset the server
power warm – Warm boot the server

More you can explore using Show and help command.

Thanks,
WintelAdmin.com

Protected: HP ILO Configuration

This content is password protected. To view it please enter your password below:


Visitors Count

Subscriber Count

    3986
May 2017
M T W T F S S
« Apr    
1234567
891011121314
15161718192021
22232425262728
293031